Hikobike ENDURO 2022 Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sepeda Hikobike ENDURO 2022. Hikobike ENDURO 2022 17 halaman.

SET MENU OPERATION

Hold the SET button for 2 seconds and enter the setting interface. Number 0 will be displayed,

and the display will flash. Click the SET to cycle from 0 to 4. Press UP or DOWN to select the

desired parameter and hold the SET for 1 second to exit.

SET 0 – RIDING MODE SELECTION

The Enduro is default set to Normal mode. You can use the – button to change to Eco mode which

will restrict the power available to the motor. This may be quite adequate if you are not tackling

steeper gradients. Power mode will use up the battery power more quickly.

SET 1 – RESET TRIP 1 DISTANCE

Click the DOWN ( - ) button to reset trip 1. The TRIP1 icon will flash and the trip will be cleared.

SET 2 – MAX SPEED SETTING

The maximum speed setting is set to 35KM/H.

SET 3 – WHEEL DIAMETER SETTING

Do not adjust this setting as it affects speed and distance (Default 27.5").

SET 4 – KM/H or MPH

Use this setting to select from either KM/H and Kilometres or MP/H and Miles.