CORBERO CV1600S/3 Buklet Instruksi - Halaman 3
Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Pembeku CORBERO CV1600S/3. CORBERO CV1600S/3 8 halaman.
Halaman Cetakwhich may cause it to explode, resulting in damage
to the appliance.
Installation
•
During normal operation, the condenser and
compressor at the back of the appliance heat up
considerably. For safety reasons, minimum
ventilation must be as shown in the relevant Figure.
Attention: keep ventilation openings clear of
obstruction.
•
If the appliance is transported horizontally, it is
possible that the oil contained in the compressor
flows in the refrigerant circuit. It is advisable to wait
at least two hours before connecting the appliance
to allow the oil to flow back in the compressor.
•
There are working parts in this product which heat
up. Always ensure that there is adequate ventilation
as a failure to do this will result in component failure
and possible food loss. See installation instructions.
•
Parts which heat up should not be exposed.
Wherever possible the back of the product should
be against a wall.
•
If the appliance has been transported horizontally, it
CONTENTS
10
is possible that the oil contained in the compressor
ílows in the refrigerant circuit. It is advisable to wait
at least two hours before connecting the appliance
to allow tl¦e oil to flow back in the compressor.
Environment Protection
This appliance does not contain gasses which
could damage the ozone layer, in either its
refrigerant circuit or insulation materials. The
appliance shall not be discarded together with
the urban refuse and rubbish. Avoid damaging
the cooling unit, especially at the rear near the
heat exchanger. Information on your local
disposal sites may be obtained from municipal
authorities. The materials used on this appliance
marked by the symbol
9
10
10
10
11
11
11
11
11
12
12
12
12
12
12
are recyclable.
13
13
13
13
14
14
14
14
15
15