AgSense CROP-LINK Petunjuk Pengkabelan - Halaman 7

Jelajahi secara online atau unduh pdf Petunjuk Pengkabelan untuk Unit Kontrol AgSense CROP-LINK. AgSense CROP-LINK 10 halaman. 2012 - 14 soil moisture monitoring
Juga untuk AgSense CROP-LINK: Petunjuk Pengkabelan (8 halaman)

Halaman Cetak

Wiring the Sentek soil moisture probe

Wiring the Sentek probe: Only 1 probe can be connected to this unit at a time.

1. Connect the Blue wire from the Sentek probe to any terminal marked SOIL as shown

above.

2. Connect the Yellow wire from the Sentek probe to any terminal marked GND as shown

above.

3. Connect the Red wire from the Sentek probe to the terminal marked 5V OUT as shown

above.

to the Crop Link Unit

Page 4