Corbin Russwin ASSA ABLOY Museo MP6600 Series Panduan Petunjuk Instalasi - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Kunci Corbin Russwin ASSA ABLOY Museo MP6600 Series. Corbin Russwin ASSA ABLOY Museo MP6600 Series 8 halaman. Levers multi-point lock

Halaman Cetak

MP6600 Series

Multi-Point Lock

Installation Instructions

Installation (continued)

Instructions for MP6600 Series Multi-Point Lock

Important: Check template 4740 to prep door for

function holes, size, and location.

1. Verify strike location according to template.

2. Clean out door pocket and door edge of

any debris.

3. Make sure the handing of the lock (latch and

locking piece) match the handing of the door.

4. Slide lock into the door and hold.

5. Slide outside lever and rose assembly (or lever

and escutcheon assembly) through the door;

lock body and hold.

Note:

Keep door open while installing lock.

If installing lever onto only one side of the

door, see separate instruction sheet.

6. Assemble keyed cylinder first through narrow

end of spring and then wider opening of collar

(or escutcheon).

7. Assemble onto door by threading into lock

until cylinder face is flush with collar edge.

Pulling key slightly out of cylinder will help

when threading cylinder inward.

Note:

Corbin Russwin logo must be horizontal and

on upper portion of cylinder face.

8. Tighten cylinder clamp screw with #2 Phillips

screwdriver.

9. Secure lock in door with two (2) #12 x 1-1/4"

wood screws or #12-24 x 1/2" machine

screws. Do NOT tighten completely at this

time .

10. Slide spindle into lockbody hub.

11. Slide adapter and plate assembly over spindle

and secure with two (2) #8-32 screws.

For installation assistance contact Corbin Russwin

1-800-543-3658 • [email protected]

whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

Figure 6

Figure 7

Outside of Door

RH Door Shown

Outside

of Door

FM526 03/20