Dea LOOK 374/SC Petunjuk dan Peringatan Pengoperasian - Halaman 17
Jelajahi secara online atau unduh pdf Petunjuk dan Peringatan Pengoperasian untuk Pembuka Gerbang Dea LOOK 374/SC. Dea LOOK 374/SC 20 halaman. Electro-mechanical operator for swing gates
Halaman Cetak
This guide has been prepared for the final users of the automatism; the installer is required to deliver this guide and
illustrate its contents to the person in charge of the system. The latter must then provide similar instruction to all the other
users. These instructions must be carefully conserved and easily available for consultation when required.
Good preventive maintenance and frequent inspection ensures the long working life of the product. Contact the installer
regularly for routine maintenance and in event of anomaly.
1. Always keep a safe distance from the automatism during operation and never touch any moving part.
2. Prevent children from playing near the automatism.
3. Perform the control and inspection operations prescribed in the maintenance schedule and immediately stop using the
automatism whenever signs of malfunction are noted.
4. Never disassemble parts of the product! All maintenance and repair operations must be performed only by qualified
personnel.
5. The release operation must sometimes be performed in emergencies! All users must be instructed on the use of the
release mechanism and the location of the release keys.
WARNING Disconnect the power supply from the control panel before releasing the operator. In case you cannot turn
the power off, you will necessarily have to re-lock the motor in the position in which it was unlocked.
All LOOK models are equipped with a release device which must be operated as follows:
1. Disconnect the power supply;
2. Turn the cap placed on the back of LOOK in order to discover the underlying shaped hole;
3. Insert the release key inside the shaped hole paying attention to the direction of insertion (Fig. 8.a).
4. Rotate 90 degrees (counterclockwise to unlock, clockwise to lock ) the release key (Fig. 8.b);
5. At this point LOOK is released and if no other obstructions are present, the gate is free to move;
6. The opposite procedure returns LOOK operator to normal working conditions;
7. Remember to protect the lock with the respective cover so that the operator is protected by water or powder (even when
it remains unlocked for a long time).
WARNING: During this operation gate may present uncontrolled movement: operate with extra care so to avoid any risk.
The only operation that the user can and must do is to remove branches, leaves, and any other object that might obstruct
the gate's free movement. Warning! Always disconnect the power supply whenever performing operations on the gate!
INSTRUCTIONS FOR THE FINAL USER
SAFETY RULES
LOOK RELEASE MECHANISM
CLEANING AND INSPECTIONS
D EA SYST EM S. p.A . - Via Del l a Tecni c a, 6 - ITALY
3 6 0 13 PIO VEN E R O C CHET T E (VI)
t e l . + 3 9 0 4 45 5 50 7 89 - f a x + 3 9 0 44 5 55 02 6 5
I n t e r n e t h t t p: \ \ w w w. de as y s t em .c om - e - mai l : d ea s y s te m@d ea s y s te m.c om