HIKOKI H 3641DA Manual Petunjuk Penanganan - Halaman 10

Jelajahi secara online atau unduh pdf Manual Petunjuk Penanganan untuk Alat Listrik HIKOKI H 3641DA. HIKOKI H 3641DA 20 halaman.

USB DEVICE CONNECTION
PRECAUTIONS (UC18YSL3)
When an unexpected problem occurs, the data in a USB
device connected to this product may be corrupted or lost.
Always make sure to back up any data contained in the
USB device prior to use with this product.
Please be aware that our company accepts absolutely no
responsibility for any data stored in a USB device that is
corrupted or lost, nor for any damage that may occur to a
connected device.
WARNING
○ Prior to use, check the connecting USB cable for any
defect or damage.
Using a defective or damaged USB cable can cause
smoke emission or ignition.
○ When the product is not being used, cover the USB port
with the rubber cover.
Buildup of dust etc. in the USB port can cause smoke
emission or ignition.
NOTE
○ There may be an occasional pause during USB
recharging.
○ When a USB device is not being charged, remove the
USB device from the charger.
Failure to do so may not only reduce the battery life of a
USB device, but may also result in unexpected
accidents.
○ It may not be possible to charge some USB devices,
depending on the type of device.

NAMES OF PARTS

The numbers in the list below correspond to Fig. 1–Fig. 19.
1
Tool
2
Front cap
3
Grip
4
Grip (B)
5
On-lock Switch
6
Trigger switch
7
Handle
8
Impact rate selector switch
9
Display lamp
10
Name plate
11
Battery
12
Side handle
13
Motor
14
Tail cover
15
LED light
16
Housing
17
Cylinder Case Cover
18
Latch
19
Charge indicator lamp
20
Remaining battery indicator switch
21
Remaining battery indicator lamp
22
Display panel
23
Grease
24
Band
25
Handle bolt
26
Mount
27
Band attachment area
28
Sliding grooves (Product)
29
Terminal (Product)
30
Air gun
31
Terminal (Battery)
32
Sliding grooves (Battery)
33
Rubber cover
34
USB port
35
USB cable
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
H3641DA: Cordless Demolition Hammer
Low Vibration Handle
To reduce the risk of injury, user must read
instruction manual.
Direct current
V
Rated voltage
Bpm
Full-load impact rate
Weight *
1
kg
(According to EPTA-Procedure 01/2014)
Switching ON
0
Switching OFF
Impact rate selector switch
Display lamp
L
Low impact rate
H
High impact rate
10