HIKOKI M 18DYA Manual Petunjuk Penanganan - Halaman 9
Jelajahi secara online atau unduh pdf Manual Petunjuk Penanganan untuk Alat Listrik HIKOKI M 18DYA. HIKOKI M 18DYA 16 halaman.
Halaman Cetak
REGARDING LITHIUM-ION BATTERY
TRANSPORTATION
When transporting a lithium-ion battery, please observe the
following precautions.
WARNING
Notify the transporting company that a package contains a
lithium-ion battery, inform the company of its power output
and follow the instructions of the transportation company
when arranging transport.
○ Lithium-ion batteries that exceed a power output of
100 Wh are considered to be in the freight classifi cation
of Dangerous Goods and will require special application
procedures.
○ For transportation abroad, you must comply with
international law and the rules and regulations of the
destination country.
Power Output
2 to 3 digit number
NAMES OF PARTS (Fig. 1–Fig. 13)
Collet nut
Collet(1/8")
Bit (1/8")
Depth guide
Knob bolt
Lock button
Motor
Switch
Hook
Battery
Name plate
LED light
Latch
Pilot lamp
Screw
Groove
Wrench
Collet hole
Collet (1/4")
Shaft
Bit (1/4")
Work piece
Rotation of bit
Tool feed
Inner peripheral
cutting (Clockwise)
Outer peripheral
cutting
(Counterclockwise)
Display panel
Remaining battery
indicator switch
Remaining battery
indicator lamp
Air gun
Battery sliding
grooves
Ventilation holes
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
M18DYA: Cordless Cut-Out Tool
To reduce the risk of injury, user must read
instruction manual.
Always wear eye protection.
Always wear hearing protection.
Direct current
V
Rated voltage
n
No-load speed
0
Disconnect the battery
Switching ON
Switching OFF
Warning
Prohibited action
Battery
Lights ;
The battery remaining power is over 75%
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than 25%
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
NOTE
To prevent the battery power consumption caused by
forgetting to turn off the LED light, the light goes off
automatically in about 3 seconds.
9
English