Gama Sonic 81i90010 Buku Petunjuk - Halaman 3

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Pencahayaan Gama Sonic 81i90010. Gama Sonic 81i90010 4 halaman. Solar address wall plaque light

Installation Instructions
1. 1. 2
1. Clean the surface where the address numbers will be
applied.
2. Apply the desired address number using the peel and stick
numbers provided.
NOTE: A number template is included to help with the spacing.
The number template has two sides, one for 4 numbers and the
other for 5 numbers.
3. Locate your desired mounting
location and make sure the sign will
236mm/9.3in
receive direct sunlight.
4. Using the paper template, mark
and drill two holes in your desired
mounting location that are
236mm/9.3in apart.
NOTE: A template is included for help
with install
5. Insert the anchors in the holes
and install the screws in the
anchors.
NOTE: Make sure to leave a slight gap
between the head of the screw and
the anchors.
6. Turn the lamp on to your desired
setting per the Operation
Instructions.
7. Install the sign on the wall by
aligning the screws with the
grooves in the back of the sign and
sliding the sign on the screws.
page 3
.
Operation Instructions
1. On the back of the address plaque, press the ON/OFF button
to turn the lamp on. You will select the desired color
temperature of the light based on the number of times you
press the button: HINT: Cover the Solar Panel while pressing
the button to see the color of the lights
1st Press = Warm White
2nd Press = Cool White
3rd Press = OFF
2. Your light will turn on automatically at dusk.
ON OFF
Replacement Parts
1. 1. 2
Replacement Batteries are available at www.gamasonic.com
or via our Toll Free number: +1-800-835-4113.
Your Lamp uses the following battery:
SB37V08
236mm/9.3in
ON OFF
Battery inside
Made in China
Fabriqué en Chine
Hecho en China