aireRyder Cyrus Petunjuk Instalasi dan Penggunaan Manual - Halaman 6
Jelajahi secara online atau unduh pdf Petunjuk Instalasi dan Penggunaan Manual untuk Kipas angin aireRyder Cyrus. aireRyder Cyrus 6 halaman.
Halaman Cetak
CLEANING
Risk of injury: Before cleaning the fan, always switch off the power at the main circuit breaker and wait until the
fan has come to a complete stop.
Clean the fan with a dry or damp soft cloth. Do not use any liquids or detergents.
DISPOSAL
Disposal of the fan: You are required to dispose of electric and electronic appliances separately from your household
waste.Please inquire at your municipality regarding proper ways of disposal.
Be separately disposing of your electric and electronic appliances, ou are participating in recycling and you are helping
to prevent potentially toxic substances from polluting the environment.
Disposal of the packaging: The packaging consists of cardboard and marked plastic and Styrofoam which can be
recycled. Please recycle.
MALFUNCTIONS - TROUBLE SHOOTING
Risk of injury: Inappropriate repairs can lead to the fan not functioning safely. This can cause a hazard for yourself
and your environment.
Most malfunctions are caused by small errors which you can easily resolve by yourself. Please check the following table
before contacting your retailer. This way, you can spare yourself a lot of effort and cost.
Malfunction
Fan does not turn.
Fan vibrates.
Light does not work.
Fan or fan light can not
be controlled using the
remote control.
If you can not resolve the malfuntion yourself, please ask your retailer directly. Please note that the warranty will be
voided by inappropriate repairs.
MANUFACTURER
Vaxcel International Co., Ltd.
121 E North Avenue, Carol Stream, IL, USA
www.vaxcel.com
F
A
N
C
O
161031
Underlying cause (error)
Fan switched off.
No mains voltage?
Batteries of remote control empty?
Fan not installed properly?
Lamp defective?
Switch for fan speed or fan light not
in correct position?
Solution
Switch on.
Check circuit breaker.
Install new batteries.
Install fan thoroughly
according to installation
instructions.
Exchange lamp.
Switch the fan speed to high
and the fan light to on.
6