Dea TEO 700 Petunjuk dan Peringatan Pengoperasian - Halaman 6
Jelajahi secara online atau unduh pdf Petunjuk dan Peringatan Pengoperasian untuk Pembuka Pintu Garasi Dea TEO 700. Dea TEO 700 16 halaman. Sectional door electromechanical operator
Juga untuk Dea TEO 700: Petunjuk dan Peringatan Pengoperasian (20 halaman)
Halaman Cetak
6 PROGRAMMING
1 Power Supply
Turn on the power supply, the courtesy light flashes for a few seconds and the display shows numbers "
symbol "- -".
2 Motor stroke learning
1. Press on the
key until the display shows
P1;
2. Confirm by pressing the
3. When "
" is shown, press the keys
so the door opens ("
Confirm the opening position by pressing the
key;
4. When "
", appears, press the keys
so the door closes ("
Confirm the closing position by pressing the
key;
5. The door automatically opens and closes loo-
king for the opening/closing positions;
6. The display will show "- -", programming com-
plete.
3 Deletion of memorized transmitters
1. Press and hold the
you see "
" on the display;
All remotes previously memorized will be deleted;
Warning: After 20 memorized codes (upper limit), the display shows
"
".
4 Transmitters learning
1. Press and hold the
2. Press the remote key you want to learn, then release it and press
a second time (the display shows "
3. The display will show "- -", learning complete;
4. Repeat this procedure to learn other remotes up to a maximum
of 20 codes;
Warning: After 20 memorized codes (upper limit), the display shows
"
".
12
key;
/
" flashes);
/
" flashes);
key (display shows "
") for 8 sec. until
key until the display shows "
";
" flashing);
" to " " followed by the standby