aireRyder F0028 Manual - Halaman 5

Jelajahi secara online atau unduh pdf Manual untuk Kipas angin aireRyder F0028. aireRyder F0028 10 halaman. Original ceiling fan

Halaman Cetak

INSTALLATION INSTRUCTIONS

IMPORTANT:

BEFORE YOU BEGIN INSTALLATION, CAREFULLY READ ALL INFORMATION PROVIDED ON THE SAFETY

INSTRUCTIONS AND INSTALLATION INSTRUCTIONS. IF IN DOUBT, CONSULT A QUALIFIED ELECTRICIAN.

SAVE ALL INSTRUCTIONS.

NOTE: The fan weight is 16.1 lbs (7.3 kgs). Be sure the outlet box you are using is securely attached to the building

structure and can support the full weight of the fan. Failure to do so can result in serious injury.

Installation Steps :

Fig.1

Turn OFF the electric circuit at the

main fuse or circuit breaker box.

Fan Fixture Set

Fig.3

(For ceiling mount only):

Attach the canopy to the fan fixture set

with three washer and three ceiling

mount screws. Go to Fig.9 for the next

step.

Fig.6

Downrod Stand

Cover

Motor Wires

Hanger Pin

Insert the Downrod into the Collar.

Slide Hanger Pin through holes of

Collar and Downrod.

Wood Member

(2" x 4" Approx.)

Ceiling

Tighten the hanger bracket to the outlet box with two mounting screws.(Make sure

the outlet box is securely installed so that it will be able to support at least the

fan weight.) Attach the safety cable hook to the ceiling with the dry wall screw and

washer, and make sure the safety cable hook is covered by the fan canopy.

WARNING: MOUNT ONLY TO AN OUTLET BOX MARKED "ACCEPTABLE FOR

FAN SUPPORT"!

Fig.4

Hanger Pin

Remove the Lock Pin and take off

the Hanger Pin.

Fig.7

Downrod

Canopy

Collar Screws

Collar

Insert and tighten the two Collar

Screws. Slide Lock Pin into Hanger

Pin until it locks into position.

Ceiling Joist

Junction Box

Hanger Bracket

Fig.2.

Fig.5.

Lock Pin

PAGE: 5 / 9

Wood Member

Ceiling Joist

(2" x 4" Approx.)

Ceiling

Washer

Dry Wall Screw

Safety Cable Hook

Fig.5

Motor Wires

Thread the motor wires through the

downrod stand cover, canopy and

downrod.

Fig.8

Hang the fan on hanger bracket,

and make sure the slot of hanger

ball is snapped into the chip of

hanger bracket exactly.

Note: For slope ceiling installation,

make sure the slot of hanger ball and

the chip of hanger bracket face down.

140819

Junction Box

Hanger Bracket

Downrod

Canopy

Downrod Stand

Cover

Hanger Bracket

Slot

Chip