Dea NET-BOX Panduan Petunjuk Pengoperasian - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pengontrol Dea NET-BOX. Dea NET-BOX 6 halaman. Netlink radio control and device programmer
Halaman Cetak
NET-BOX
1 PRODUCT DESCRIPTION
NET-BOX is a work tool that lets you customise DEA radio controls and device settings with NETLINK technology.
Visit https://cloud.deasystem.com to view your installations and use NET-BOX.
2 TECHNICAL DATA
Power supply: Connected to a PC, NET-BOX is powered via the USB cable with maximum 2W consumption.
NET-BOX can be powered by connected a 24 Vdc 700mA power supply to the POWER 24 terminal on the internal board. This
power mode is necessary to allow any compatible accessories to operate.
Dimensions: 150x100x45 mm
Operating temperature: -10°C ÷ +50°C
3 WARNINGS
ATTENTION Any installation, maintenance, cleaning or repair operations on the entire system must only be carried out by
qualifi ed personnel. Always operate with the power supply disconnected and scrupulously follow all regulations in force in
the country of installation regarding electrical plants.
ATTENTION The use of spare parts not indicated by DEA and/or incorrect assembly may cause hazardous situations to
people, animals and property; they may also cause product malfunctions; always use the parts indicated by DEA and follow
the assembly instructions.
ATTENTION In compliance with EU Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), this
electrical product should not be treated as municipal mixed waste. Please dispose of the product and bring it to the
collection for an appropriate local municipal recycling.
4 USE
Program the radio control encryption key and serial number
NET-BOX lets you program and personalised encryption key and serial number for DEA compatible radio controls. Programming
can be wired with the specifi c GT-CABLE (art.470351) or wireless with clonable radio controls.
Programming control centres and external receivers
Connect NET-BOX to NETLINK devices to set its parameters and radio controls.
It can only be used from remote if NET-BOX is connected to the Internet via the LAN port or compatible accessory.
NETLINK radio control and device
programmer
Operating instructions and warnings
EN-1