AFL Hyperscale U Series Panduan Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Titik Akses Nirkabel AFL Hyperscale U Series. AFL Hyperscale U Series 8 halaman. Front-access v-panel
Juga untuk AFL Hyperscale U Series: Panduan Instalasi (16 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (12 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (8 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (17 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (16 halaman)

Halaman Cetak
AFL Hyperscale U Series Panduan Instalasi
Splicing the Cassette
Loop the fiber twice, route the separated fiber
7
groups to the opposite splice holders, and adjust
the fiber length.
9
Perform the splicing and install the prepared
splice protectors into the splice holders.
6
© AFL Hyperscale. All rights reserved
Prepare the pigtails. When easy-strip pigtails are
8
applied, strip the 900μm jacket and route the
pigtail groups (1-12, 13-24) to the opposite splice
holders. Adjust the pigtail lengths.
Prior closing the cassette, check that all of the
adapters are securely seated in place. Closing the
10
cassette will be obstructed if the adapters are
incorrectly located.
Series