Dea Digipro Petunjuk dan Peringatan Pengoperasian - Halaman 6
Jelajahi secara online atau unduh pdf Petunjuk dan Peringatan Pengoperasian untuk Pengontrol Akses IP Dea Digipro. Dea Digipro 15 halaman.
Halaman Cetak
3.8 Relay timing
Relay timing for ZONE 1
In setting mode:
• Press
followed by
inserption of the relay activation time. The set value indicates the times the relay will be
active. For example:
a) Inserting 05, it means the relay will remain active for 5 seconds.
b) Inserting 00, you must approach the card o insert the password once to activate the relay
and a second time to close it.
• Press
to exit the setting mode.
Door status detecting function (ZONE 1 ONLY):
the door is closed, the device automatically detects the door status and deactivates the relay
although this is still in the activation period.
Relay timing for ZONE 2
In setting mode:
• Press
followed by
inserption of the relay activation time. The set value indicates the times the relay will be
active. For example:
a) Inserting 05, it means the relay will remain active for 5 seconds.
b) Inserting 00, you must approach the card o insert the password once to activate the relay
and a second time to close it.
• Press
to exit the setting mode.
3.9 Erasing all user cards and codes, restoring factory settings
In setting mode:
• Press
followed by
password) was cancelled correctly cancelled.
• Press
followed by
• Press
to exit the setting mode and remain on standby.
Warning:
If you enter incorrect information, you will hear a double "BI-BI" and after 30 seconds the device
will automatically return to the initial mode again accompanied by the sound "BI-BI".
If you're not in the settings mode and you enter an incomplete number, or if you have to unlock
the door with the card and the password (combined) but only one of the two actions is made,
the device will return to the initial mode automatically after 5 seconds. accompanied by the
double sound "BI-BI".
Warning:
If the admin code is lost, switch the power o , hold the
indicates that the default admin code was successfully reset.
If codes are 2 digits-the default admin code is 12;
If codes are 3 digits-the default admin code is 123;
If codes are 4 digits-the default admin code is 1234;
If codes are 5 digits-the default admin code is 12345;
If codes are 6 digits-the default admin code is 123456 (the maximum is 6).
, the yellow LED blinks, digit the desired value (from 00 to 99), the
When someone opens the door and enter, and
, the yellow LED blinks, digit the desired value (from 00 to 99), the
, the yellow LED blinks, press the key
, the yellow LED blinks, press the key
twice, you will hear a long
twice, you will hear a long
key, then restore power. A sound "BI"
13