Jadens BY-245BT Faq - Halaman 4

Jelajahi secara online atau unduh pdf Faq untuk Pembuat label Jadens BY-245BT. Jadens BY-245BT 5 halaman.

7、 Problem: Won't stay connected to computer Bluetooth, can't print from mobile device

Cause: The Bluetooth of printer only can connect to one device to print at the same time.

Solution: The printer doesn't support connecting with two or more devices at the same time through the Bluetooth. When

you want to use Smartphone/windows PC/ IPad to print through Bluetooth, you should make sure the Bluetooth is

connected to your operation device.

8、 Problem: Bluetooth can't work with iPad

Cause: Inaccurate operation

Solution:

1. Print via Smartphone only compatible with iOS 8.1 or later, make sure your iPad support this firstly

2. Ensure the capacity of the IPad is enough.

3. Install the App "FBA print", connect the printer with the APP's Bluetooth, not the Bluetooth on your iPad, this is the

most important thing, connect the phone's Bluetooth from the setting makes no sense.

4. Upload PDF file (not image) via social media, print via "FBA print", not "Air print"

Operation video and direction are provided in the U‐Disk for easier understanding.

Note: If it still doesn't work after finish the above steps, please restart your iPad and printer to try. Contact us

through

9、 Problem: Print over label

Cause1: Incorrect position of printing

Cause2: Incorrect paper size and print density setting, the setting paper size is larger than the actual label size.

Solution:

Note: make sure the setting paper size is smaller than the actual label size.

1. If you install the paper for the first time, or you change the paper size, the printer needs study paper size.

2. Long press and hold on feed button until printer beep one noise, release your finger, printer will automatically study

paper size, when finished, try to print again please)

3. Please press the top button to adjust the paper when you open the cover each time, otherwise it will the content exceeds

the label size or you will have one more blank paper.

4. Make sure the label size, PDF size and print density setting are matched. For example, if your file is A4, but label is 4*6, it

will not work well properly for sure. You need edit the size before you print it.

10、Problem: Labels print light

Cause: Inaccurate setting.

Solution:

Go to "setting" >> "device" >> "printer & scanner" >> find the printer "Beeprt‐245‐BY", click "manage" >> Printing

preference >> Graphic >> choose "None" >> when it finished, print one more time, the label will be more clearly.

to get more supports.