Gamber Johnson CF53 Panduan Petunjuk Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Stasiun Docking Gamber Johnson CF53. Gamber Johnson CF53 7 halaman.

1. Make sure the dock power switch is

in the OFF position and the LED is not

lit.

2. Push the Latch Button to open the

latch if the dock is in the closed

position.

3. Insert the front of the CF-53

computer under the front hooks on the

dock. Look at the handle to make

sure the front of the computer is

centered on the front hooks.

4. Lower the back of the computer

down onto the guide pins and the

docking connector.

5. Lightly press down on the back of

the computer to ensure if is fully

seated.

6. Close the latch to engage the rear

hooks (and Dual-RF if applicable) into

the back of the computer to hold it in

place.

7. Turn ON the power switch to allow

vehicle power to the computer.

TO UNDOCK THE COMPUTER

1. Turn off the Dock Power Switch.

2. Press the Latch Button. The front

latch is spring loaded and will

automatically open. The rear hooks are

also spring loaded and will retract from

the computer.

3. Lift the back of the computer off the

guide pins and docking connector.

4. Pull the front of the computer out

from under the front hooks.

DOCKING THE COMPUTER

Latch Button

Dock Power Switch