Gamber Johnson 7160-1346 A Petunjuk Instalasi
Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Aksesori Mobil Gamber Johnson 7160-1346 A. Gamber Johnson 7160-1346 A 4 halaman. For 2020+ ford pi utility on-dash mount
Halaman Cetak
INSTALLATION INSTRUCTIONS
Product
7160-1346
7160-1346-01
2020+ FORD PI Utility On-Dash Mount
•You must read and follow all of these installation instructions. Failure to follow the
installation
instructions may result in serious bodily injury or death
•DO NOT install or use this assembly in the area in which the airbag on the vehicle may be
deployed. The installer and user of this assembly are responsible for installing and using
this
assembly outside the area in which an airbag may be deployed. (See Product Mounting
Disclaimer Below)
•If the installation of the equipment requires that the equipment (or any additional
equipment
that is added to the installation) be placed in front of an airbag, the airbag should be
deactivated. In order to secure permission for deactivating the airbag you must contact the
National Highway Traffic Safety Administration at 1-800-424-9393 to gain permission to do
so.
If you have any questions or need assistance, call Gamber-Johnson at 1-800-456-6868.
•High speed vehicle turns may cause parts fo the assembly to swivel, interfering with the
driver
or other equipment.
•Keep these installation instructions with the product and readily available in the vehicle
for future reference of other users of the product.
•Additional copies of the installation instruction can be obtained from Gamber-Johnson.
If you need assistance or have any questions, go to www.gamberjohnson.com or
call Gamber-Johnson at 1-800-456-6868.
•DO NOT remove the warning label from the product under any circumstances.
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brake lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© Copyright 2020 Gamber-Johnson, LLC
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Revision
A
Printing Spec: PS-001
Form
INST-967
1/4