Deaf Bonce Machete series Panduan Pemilik - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Konverter Media Deaf Bonce Machete series. Deaf Bonce Machete series 12 halaman. Hf speakers
Juga untuk Deaf Bonce Machete series: Panduan Pemilik (16 halaman), Panduan Pemilik (12 halaman), Panduan Pengguna (16 halaman), Panduan Pemilik (8 halaman), Panduan Pemilik (20 halaman), Panduan Pemilik (16 halaman), Panduan Pengguna (16 halaman), Panduan Pemilik (20 halaman), Panduan Pemilik (16 halaman), Panduan Pemilik (16 halaman), Panduan Pemilik (20 halaman), Panduan Pemilik (20 halaman), Panduan Pemilik (16 halaman), Panduan Pemilik (16 halaman), Panduan Pemilik (16 halaman), Panduan Pemilik (16 halaman), Panduan Pemilik (12 halaman), Panduan Pemilik (16 halaman), Panduan Pemilik (16 halaman)

Halaman Cetak
Deaf Bonce Machete series Panduan Pemilik
3 4 5
6
7
1
2
1 1
12
S e l e c t i o n o f t h e d i a m e t e r o f s p e a k e r c a b l e s
Use the table below to select the desired diameter based on the length and power consumption.
4 . H O W T O U S E
The correct choice of the amplifier settings prolongs the lifetime of your subwoofer. Proper coordination of the head unit (HU)
with the amplifier will provide clean, undistorted signal fed to the subwoofer, which prevents overheating and voice coil damage.
Like any other speaker the subwoofer has moving and stationary parts. We strongly recommend that the moving parts of the
subwoofer should be warmed up at the beginning of operation. Be extra careful when warming up the parts. Warm up the
subwoofer using musical material for 40 hours at medium power. If you feel strange smell during operation at maximum volume,
you should lower the volume of the subwoofer and let the device to cool down at a low volume.
Recommended settings of the amplifier and HU: Volume of HU should not exceed 80%. The amplifier sensitivity should be set
to 50%. The low pass filter LPF (the filter that cuts all frequencies above those set for the filter) should be set to 63-80 Hz.
5 . S P E C I F I C A T I O N S
Model
Subwoofer size (Inch)
Power RMS (Watt)
Power MAX (Watt)
Frequency response (Hz)
Impedance (Ohm)
1. FUSE - fuse connection terminal
2. +12V – power supply terminal +12 V
3. REM IN – connector of remote activation of the amplifier
4. GND – grounding supply terminal
5. INPUT – signal input, RCA jacks
6. HIGH LEVEL INPUT – high level signal input terminal
7. REMOTE – input for connection of the bass remote control
8. GAIN – input signal level adjustment (0.85 – 4 V)
9. LPF – low pass filter (30 Hz – 280 Hz at 12 dB/Oct)
8
9 10
10. POWER – LED for operation (blue), LED for protection (RED)
11. GAIN – input signal level adjustment
12. POWER – LED for operation (blue)
25 000
20 000
15 000
10 000
8000
6000
4000
2000
1000
500
250
100
0-1 1-2 2-3 3-4 4-5 5-6 6-7
Size
A.W.G mm²
5
16,8
8
8,37
10
5,26
14
2,08
7-8
Cable length (m)
ML-10A
10
250
1000
25 - 280
4
4
ML-12A
12
250
1000
25 - 280
4
EN