Deagostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T Manual - Halaman 5
Jelajahi secara online atau unduh pdf Manual untuk Mobil Mainan Bermotor Deagostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T. Deagostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T 18 halaman. Pack 8
Juga untuk Deagostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T: Manual (18 halaman), Manual (18 halaman), Manual (18 halaman), Manual (18 halaman)
Halaman Cetak
9.5
P
OsiTiOn
the suspension ball joint 9E between the two
side plates on the lower control arm 9B. Attach the pieces
together with a type FM screw. Insert the shock absorber
piston 9D between the two adjacent holes and attach with another type
FM screw.
9D
FM
9F
8I
8C
9.8
M
OunT
the assembled right suspension onto
the right beam of the front section of the chassis
5A, inserting the linchpins on the suspension dome
8H into the holes in the middle of the beam. Attach the dome 8H
to the chassis with two type FM screws, inserting them from
underneath. Put the end of the lower control arm 9B and the
lower control arm anchor 9A together, and attach them together
with a type EM screw.
9B
9E
CM
9D
9J
35
9.6
i
nserT
the suspension bump stop 9C into the hole in
the lower control arm 9B next to the shock absorber
piston 9D. Put the ball joint 9E into the spindle 9F. To
attach the piece, insert a type EM screw from underneath
and tighten.
9C
9B
9F
9.7
G
the pieces you assembled in stage 8.
eT
Insert the spring 9J into the shock absorber
unit 8C, followed by the shock absorber piston
9D. Then align the two tongues on the spindle 9F with the
holes on the brake caliper baseplate 8I and join the pieces
together with two type CM screws.
EM
5A
FM
STAGE 9
9D
9E
EM
9B
9A
8H