AGT INDUSTRIAL AGT-WB24 Panduan Produk - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Produk untuk Penyeimbang Roda AGT INDUSTRIAL AGT-WB24. AGT INDUSTRIAL AGT-WB24 18 halaman.
Halaman Cetak6) turns slowly the tires counterclockwise, until the inner side of the indicator lights are all on, at the point at 12
o 'clock(12H is off) or 9 o 'clock (9H is on) are the unbalance point of alignment planes. Balance alignment
planes are as shown in below pictures. Paste corresponding balance weight on the inside of the wheel rim.
See pic.7.
7) After placing the balanced lead, press
pic. 8. It indicates that the balancing was successful.
3
ALU S balance mode
enter manually)
★This function is applicable to very special rims, and the normal alu-1 and alu-2 methods cann't
guarantee sufficient balance accuracy. Choose this balance mode.
1 ) Input aI, aE, d value
aI distance"value: Pull out the ruler head as it is shown in pic. 9 first and hold it at F1 position for 4 seconds,
automatically read the "aI distance" data from the measuring scale, and manually correct the data through
input
(automatic measurement is optional).
AE distance " value: pull out ruler head as it is shown in pic. 9 first and hold it at FE position for 4 seconds,
and automatically read the" aE distance "data from the measurement
Pic.6
Pic.7
key to rotate the wheel. If the operation is correct,we will see
Pic.8
(Automatic input gauge is optional function .No automatic gauge please
scale，and manually correct the data
10