Deagostini MODEL SPACE Honda CB750 FOUR Panduan Perakitan - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Perakitan untuk Mainan Deagostini MODEL SPACE Honda CB750 FOUR. Deagostini MODEL SPACE Honda CB750 FOUR 16 halaman. Pack 12
Juga untuk Deagostini MODEL SPACE Honda CB750 FOUR: Panduan Perakitan (16 halaman), Panduan Perakitan (16 halaman), Panduan Perakitan (20 halaman), Panduan Perakitan (16 halaman), Panduan Perakitan (16 halaman), Panduan Perakitan (16 halaman), Panduan Perakitan (16 halaman)

Halaman Cetak
Deagostini MODEL SPACE Honda CB750 FOUR Panduan Perakitan
Honda CB750 FOUR: Assembly Guide
19
Align the circled hole in the right
frame half with the hole at the rear of
the crankcase.
23
Place a type Q screw into the aligned
holes at the front of the crankcase.
234
20
Then align this circled hole in the
frame half with the hole at the front of
the crankcase.
24
Use the cross wrench to tighten the type
Q screw into place.
21
Place a type E screw into the aligned
holes at the rear of the crankcase.
25
After a while, the wrench may start to
slip. At this point, you should use pliers
to tighten the screw further.
22
Tighten the type E screw into place.
26
The engine and air filter will now be secured to
the right frame half, as shown.