Deagostini MODEL SPACE SUZUKI GSX 1300R HAYABUSA Panduan Perakitan - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Perakitan untuk Mainan Deagostini MODEL SPACE SUZUKI GSX 1300R HAYABUSA. Deagostini MODEL SPACE SUZUKI GSX 1300R HAYABUSA 11 halaman. Pack 03
Juga untuk Deagostini MODEL SPACE SUZUKI GSX 1300R HAYABUSA: Panduan Perakitan (13 halaman)
Halaman Cetak
SUZUKI GSX 1300R Hayabusa: Assembly Guide
3
Adjust the position of the fender to align
the holes.
6
Place another 2 × 5mm hex screw onto the
end of the hex wrench and insert it into
the hole below the first one.
28
4
Hold a 2 × 5mm hex screw on the end of the hex wrench and insert into the
first hole (arrowed). Please note that the 2 × 5mm hex screw is different to the
2 × 5mm self-tapping hex screw, which can be identified by the wider spaces
between the threads, as shown above right.
7
Tighten the second hex screw into place.
Again, leave it a little loose.
2 × 5mm
2 × 5mm
self-tapping
hex screw
hex screw
8
Place a 2 × 5mm self-tapping hex screw
onto the end of the wrench, and insert it
into the hole just behind the fork.
5
Tighten the 2 × 5mm hex screw into the
hole. Because there is a risk of damage if
the screw is over-tightened, leave it a
little loose.
9
Tighten the self-tapping hex screw into
the hole.