GAME SandPRO 50D Panduan Pemilik - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Penyaringan Air GAME SandPRO 50D. GAME SandPRO 50D 20 halaman. Pool filter system
- 1. Table of Contents
- 2. Safety Warnings
- 3. General Information
- 4. Technical Specifications
- 5. Parts List/Reference
- 6. Getting Started
- 7. Assembly Instructions
- 8. Connecting the Filter System
- 9. Valve Operations
- 10. Filter Operations
- 11. Maintenance
- 12. Troubleshooting
- 13. Limited Warranty Statement
- 14. Appendix: Exploded Parts Diagram
Powering the Filter Pump
It should be noted that the Pool Filter System does not have an on/off switch. Rather, power to the filter pump is connected and
disconnected by means of plugging in and unplugging the power cord from the power source. It is important that you read and follow
the instructions on proper power supply sources (see Section 5, Power Source Requirements) to avoid overloading the pump motor
and/or electric shock.
Sand & Initial Preparation
The Pool Filter System requires a specific type of sand (not included) for optimum operation: namely, silica sand with a particle size
of 0.45 mm - 0.55 mm. You can purchase this sand at most pool supply stores. While the sand will come packaged, it is important that
the sand be cleaned prior to running the filter system in filtration mode (see Section 9, Filter Operations).
Installation
Read and understand this manual carefully before installation. Failure to follow all instructions may result in electric shock, serious
personal injury or death.
3.
TECHNICAL SPECIFICATIONS
SandPRO 35D (item 4706, 1/3 hp)
Item
Pump Flow Rate
Design Flow Rate
MAX Operating Pressure
Filtration Area
Rated Voltage
Sand Volume
SandPRO 550D (item 4728, 1/2 hp)
Item
Pump Flow Rate
Design Flow Rate
MAX Operating Pressure
Filtration Area
Rated Voltage
Sand Volume
SandPRO 50D (item 4710, 1/2 hp)
Item
Pump Flow Rate
Design Flow Rate
MAX Operating Pressure
Filtration Area
Rated Voltage
Sand Volume
SandPRO 75D (item 4711, 3/4 hp)
Item
Pump Flow Rate
Design Flow Rate
MAX Operating Pressure
Filtration Area
Rated Voltage
Sand Volume
NOTE: Requires 25 lbs (11.3 kg) not included
U.S. Units
Metric Units
2220 GPH
8.4 m3/hr
660GPH
2.5 m3/hr
40 psi
2.75 Bar
0.53 ft2
0.05 m2
110 V
110 V
25 lbs
11.3 kg
NOTE: Requires 25 lbs (11.3 kg) not included
U.S. Units
Metric Units
2,400 GPH
9.1 m3/hr
912 GPH
3.5 m3/hr
40 psi
2.75 Bar
0.76 ft2
0.07m2
110 V
110 V
25 lbs
11.3 kg
NOTE: Requires 50 lbs (22.6 kg) not included
U.S. Units
Metric Units
2,400 GPH
9.1 m3/hr
912 GPH
3.5 m3/hr
40 psi
2.75 Bar
0.76 ft2
0.07m2
110 V
110 V
50 lbs
22.6 kg
NOTE: Requires 75 lbs (34 kg) not included
U.S. Units
Metric Units
3,120 GPH
11.8 m3/hr
1,392 GPH
5.3 m3/hr
40 psi
2.75 Bar
1.16 ft2
0.11 m2
110 V
110 V
75 lbs
34 kg
5
SAVE THESE INSTRUCTIONS