HIKOKI UC 18YGL2 Manual Petunjuk Penanganan - Halaman 6

Jelajahi secara online atau unduh pdf Manual Petunjuk Penanganan untuk Pengisi Daya Baterai HIKOKI UC 18YGL2. HIKOKI UC 18YGL2 16 halaman.

English

○ Since the built-in micro computer takes about

3 seconds to confirm that the battery being charged

with UC18YGL2 is taken out, wait for a minimum of

3 seconds before reinserting it to continue charging. If

the battery is reinserted within 3 seconds, the battery

may not be properly charged.

MAINTENANCE AND INSPECTION

1. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure that

they are properly tightened. Should any of the screws

be loose, retighten them immediately. Failure to do so

could result in serious hazard.

2. Cleaning of the charger

When the charger is stained, wipe with a soft dry cloth

or a cloth moistened with soapy water. Do not use

chloric solvents, gasoline or paint thinner, for they melt

plastics.

3. Store idle charger

When not in use, the charger should be stored in dry,

high or locked-up place — out of reach of children.

CAUTION

In the operation and maintenance of power tools, the

safety regulations and standards prescribed in each

country must be observed.

NOTE

Due to HiKOKI's continuing program of research and

development, the specifications herein are subject to

change without prior notice.