Maisense Freescan Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Peralatan Medis Maisense Freescan. Maisense Freescan 2 halaman.

Halaman Cetak

Pair

Step 1

Install myFreescan app

on your smartphone

Install myFreescan app on your smartphone.

Scan the below QR code or search on App store / Google Play for

myFreescan app to install it on your smartphone.

Download for

Apple iOS

Step 2

Pair device and

myFreescan app

Eva

Ensure your smartphone Bluetooth is enabled.

– Click "Setting" on the dashboard of myFreescan app.

– Click "Bluetooth setting".

– Click the "Pair" button and search for a pairable

device.

01-01 05:23

1234-5678

USER A

Reject

Turn on the power of

Pick your

Freescan

the device and press

device and verify the

the down button "V"

passkey to get paired.

to enable Bluetooth.

Step 3

Upload the measured data

to myFreescan app

Please ensure your device is

turned on and click "Sync" to

upload the measured data.

Calibrate

can be calibrated with another certified

blood pressure monitor to ensure its accuracy.

Please calibrate your

the first time, after dramatic weight change, surgeries, or

critical illness, and calibrate it every 6 months afterwards.

Round 1

01-01 05:23

USER A

Calibration

Round 1/2

Start

measuring

with Freescan

Calibration

Measure with

Certified BP

Monitor.

Done

Adjust to

Round 1 result

Round 2

Calibration

Round 2/2

Start

measuring

with Freescan

Calibration

Measure with

Certified BP

Monitor.

Done

Adjust to

Round 2 result

rror message

E01

1. Rest your shoulder, forearm and

elbow comfortably on the table .

2. Make sure your hands are not

off the table.

3. Do not shake the device.Do not

Device not

attempt to view the device screen.

stable

Press the Start button to measure

again.

before using it for

Keep the Start

until the measurement is complete.

Press the Start button to measure

Start button

again.

released

Calibration

Set

Clear

Enable the Bluetooth function on

your smartphone.

Ensure the distance of device and

Back

smartphone are within 5 meters.

Bluetooth

not found

Press the Start button to measure

again.

1. Use wet wipes to moisturize the

wrist and nger tips.

2. Wipe away grease on the

electrodes.

3. Con rm Step 3 and Step 4 of B

No ECG

detected

Press the Start button to measure

again.

E05

Con rm Step 2 of the location of

your pulse and con rm Step 4 of

A and B.

Weak pulse

Press the Start button to measure

again.

If E05 still appears, rest for 5 minutes and try to measure again.

Please reset the device through

the reset hole. If this error reoccurs,

please contact the distributor for

further assistance.

Device

failure

Press the Start button to measure

again.

E07

Keep at least one meter away

from radio sources, such as

computer screens.

Radio

Press the Start button to measure

interference

again.

If E07 occurs constantly, please contact the distributor for further

assistance.

User Switching

01-01 05:23

USER A

button pressed

Press and hold the up button to switch to the

other user if created.

FCC Notices :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.This equipment has been

tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures :

Reorient or relocate the receiving antenna.Receiver is connected.

–

Increase the separation between the equipment and receiver.

–

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

–

Consult the dealer or an experienced radio/TV technician for help.

–

CAUTION :

Any changes or modifications not expressly approved by the grantee of this device could void the user's

authority to operate the equipment.

Model: Freescan

Product Name: Heart Performance Monitor (311020)

USER A

01-01 05:24

USER B