Maisi Smart Dashcam Panduan Memulai Cepat - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Kamera Dasbor Maisi Smart Dashcam. Maisi Smart Dashcam 16 halaman.

* Check if the Power On Delay is turned on, you should turn if off

* Disable the motion detection

Is there an "Emergency" button to start recording and save on demand

on the dash cam?

Yes. Just press

once (when the camera is recording) to achieve this

function. A key icon will show up just next to the counter on the top right

corner. Press

again to stop the emergency recording. This recording will

not be overwritten.

What is a "G-Sensor" feature on a dash camera?

A "G Sensor" is a feature / setting that allows a specific video file that is

actively being produced / recorded to be "locked" and protected from

becoming deleted as the camera continues to record video while in "loop".

Cameras have low, medium and high settings. If the setting is set too high

then the camera may "lock" files every time you come to a quick stop or run

over a pothole. The G-Sensor setting must be used cautiously and

experimented with for each driver and vehicle. It is suggested that a new

dash cam owner drive with it off or in the low setting in order to get a "feel" for

how it functions in a particular vehicle and driving style.

Under G-Sensor Setting, which one is more sensitive: 2G, 4G, or 8G?

2G is much more sensitive than 8G, you can set it at 8G when you start to

use it.

Why I was unable to delete video files on my computer?

Make sure those files are not protected. The following files are NOT

removable:

Videos footage that were recorded by G-Sensor

Video footage that were recorded by Emergency Recording

In order to delete those files, make sure to unlock them first.

Page 15