Adeunis RF MOTION V2 Panduan Referensi Teknis - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Referensi Teknis untuk Aksesori Adeunis RF MOTION V2. Adeunis RF MOTION V2 15 halaman. 868 eu - lorawan/sigfox

Halaman Cetak

2.2.7 Luminosity alarm (0x50)

If the luminosity alarm is activated, this frame is sent when an alarm of exceeding threshold appears or disappears.
Offset
(in byte)
0
1
2
3
Decoding example:
Offset
0
1
2
3

2.2.8 Digital input alarm (0x51/0x52)

This frame is sent when the number of detected events exceed the threshold
Offset
(in byte)
0
1
2
3-6
7-8
Decoding example:
Offset
0
1
2
3-6
7-8
Data
0x50
Status
Alarm state
Luminosity
Data
0x50
0x80
0x01
0x32
Data
0x51
0x52
Status
Alarm state
Global counter
Instant counter
Data
0x52
0x80
0x01
0x000001230
0x0003
Manage & optimize your assets & services
283, rue louis Néel 38920 CROLLES, France
Tél : +33 (0)4 76 92 07 77 E-mail : [email protected]
Date: 02/12/2019
Description
Frame code
Status byte
0: inactive alarm
1: active alarm (threshold exceeded)
Measured luminosity when alarm has occurred
Description
Frame code
Frame counter: 4
Bit1@0: LowBat not detected
Alarm active
50 => luminosity at 50%
Description
Frame code for digital input 1 (button)
Frame code for digital input 2
Status byte
Define precisely the input/output state
(ON/CLOSED : 1, OFF/OPEN : 0)
•
<0> Channel1 current state
•
<1> Channel1 state when sending the
previous frame
Global counter the detected events
Number of events detected since the last alarm
sending
Description
Frame code (digital input2)
Frame counter: 4
Bit1@0: LowBat not detected
Bit0@1 => Current state: ON/CLOSED
Bit1@0 => Previous state: OFF/OPENED
0x1230 => 4656 events detected since the device
is in production mode
3 events detected since the last alarm sending
adeunis
®
www.adeunis.com
Page 12 / 15