Jafanda JF260 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembersih Udara Jafanda JF260. Jafanda JF260 8 halaman.

Halaman Cetak

CARE & MAINTENANCE

THE ADAPTER MUST BE UNPLUGGED BEFORE ANY MACHINE MAINTENANCE OPERATION.

1. CLEANING THE BODY OF THE DEVICE (RECOMMENDED ONCE A MONTH):

1) Use a soft cloth to remove stains.

2) Stubborn stains that are not easy to clean can be wiped off with a soft cloth dipped in an

appropriate amount of neutral detergent.

Note: do not use hard objects to scratch the machine shell. When removing the base,

follow the instructions to avoid damaging machine parts.

2. FILTER CLEANING AND REPLACEMENT (RECOMMENDED ONCE EVERY 3-6 MONTHS):

1) Filter replacement will be reminded by the built-in program, which can be replaced

according to the service life of the machine, or can be replaced in real time by the

filter's mandatory service life reset function.

* The filter's life is is about 3000 hours, and the 5 indicator lights will decrease by one every

600 hours. When the filter's remaining life is lower than 150 hours, the filter button will turn

red, and the last indicator light will start flashing (1Hz) to warn the filter screen needs to be

replaced.

When this happens, replace the filter and press the filter button to reset the filter's life

indicator.

Filter life reset:

When the filter life is ≥150 hours, touching the filter's life reset button (3s) will not reset the

filter's life, but only a emit a"ding" sound. When the filter life is <150 hours, the filter's life reset

button will turn red: long press the filter's life reset button (3s).A "ding" sound will confirm the

filter's life is reset, . The filter's life reset is completed, and the indicator light of the filter

life is fully on.

Mandatory reset of filter life:

Within 30 seconds after power-on, in the standby mode, long press the filter reset button

(more than 3s). A a "ding" sound will indicate that the filter life is forced to reset, , and the

screen will flash 6 times (2 times/second), indicating that the mandatory reset action has

been completed. Reboot, and the filter's life indicator light turn back on.

2) when dust accumulates on the surface of the composite filter, you can use a vacuum

cleaner to clean the surface dust, in order to extend the service life of the filter (it is

recommended to clean once a month. Do not wash).

* Depending on the machine's environment, the filter's life will be different. For example, in

places where people smoke and pets are present, the life of the screen is shorter. When the

purification effect is not good, replace the filter in time.

* Please dispose the used waste filters according to the relevant regulations of solid waste.

REPLACEMENT FILTERS

1. When the filter button

2. Touch the POWER

has a red light and the

button to turn off the

remaining light of the

machine and unplug the

filter's life indicator on the

adapter.

display screen starts

flashing, the filter needs to

be replaced.

4. Remove the base.

5. Remove the used

filter screen from the

machine.

7. Put the new filters into the

8. Cover the base and

machine.

tighten the knob to the

locking position in the

marked direction.

3. Turn the product

upside down and open

the knob on the base to

the open position

according to the

product label.

6. Remove the packing

plastic bags of the new

filters.

9. Plug in the adapter and

touch the POWER button

to restart it.