Dean Forge Croft Clearburn Junior Inset Panduan Petunjuk Pengoperasian - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Kompor Dean Forge Croft Clearburn Junior Inset. Dean Forge Croft Clearburn Junior Inset 19 halaman. Clearburn range

Halaman Cetak

1. Controlling the Stove

Multi fuel kit fitting instructions for Croft Slimline & Small

This M/F kit consists of five parts:

A. Centre Grate

B. Main Grate

C. Riddle bar

D. Knob for riddle bar

E. Ash pan tool

F. Ash Pan

To fit:

Remove the front panel under the door and the log retainer. Replace rear bricks with new

thicker bricks supplied in kit.

With the rope seal on the main grate (B) facing you tilt the main grate clock wise, insert into

stove lowering so the right hand side is under the brick retaining angle and the left hand leg

slides down between the first brick and a bar that is welded to the stove. Level the main grate

(B) then slide it the rest of the way into the stove. The front main grate (B) should now sit on

the bars on each side at the front.

Remove the blanking bolt on the right hand side of the stove body and slide the Riddle bar (C)

through the hole. Fit the Centre grate (A) with the arm facing forwards, tilt so you are able to

insert the riddle bar (C) through the top of the hole in the arm then screw the Knob for riddle

bar (D) on the end of riddle bar (C) outside the stove.

Fit ash pan and front plate below door. Your existing wood burning log retainer is not used

with the M/F kit.