HIKVISION CMHR9333 Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan HIKVISION CMHR9333. HIKVISION CMHR9333 2 halaman. Turbo hd tvi turret & bullet camera

Halaman Cetak

Figure 2-3 Secure the Camera

6.Adjust the camera according to the figure below

to get an optimum angle.

Figure 2-4 Universal Adjustment

7.Use the screwdriver to adjust the ZOOM screw

and the FOCUS screw until you get the optimum

image.

Figure 2-5 Zoom and Focus Adjustment

2.2 Installation of Type II Camera

Both wall mounting and ceiling mounting are

suitable for type bullet camera. Ceiling mounting

will be taken as an example in the section. And you

can take steps of ceiling mounting as a reference

if wall mounting is adopted.

Steps:

1.Drill the screw holes and the cable hole in the

ceiling according to the supplied drill template.

2.Hammer the supplied plastic expansion bolt into

the screw holes.

Figure 2-6 Drill Template

3.Route the cables to the cable hole and connect

the corresponding cables.

4.Fix the camera to the ceiling with the supplied

screws.

Figure 2-7 Fix the Camera to the Ceiling

5. Adjust the surveillance angle.

1). Loosen No.1 adjusting screw to adjust the pan

position (0 ~ 360 ).

2).Tighten No.1 adjusting screw.

3). Loosen No.2 adjusting screw to adjust the

tilting position(0 ~ 90 ).

4).Tighten No.2 adjusting screw.

5). Loosen No.3 adjusting screw to adjust the

( °

° )

rotation position 0 ~ 360 .

6).Tighten No.3 adjusting screw.

0~360

0~90

0~360

Figure 2-8 3-axis Adjustment

6.Push the focus &zoom adjustment cover upward

to move it aside.

7.Use the cover as a screwdriver to adjust the ZOOM

screw and the FOCUS screw until you get the

optimum image.

Focus

Cover

Zoom

Cover

0~360

Figure 2-9 Zoom and Focus Adjustment

3 Menu Operation

AWB

SPECIAL

VIDEO. OUT

DAY&NIGHT

SYSTEM

EFFECT

AUTO

PRIVACY

FRAME

CAMERA

COLOR

ZONE

RATE

GAIN

USER

ESC

COLOR

MOTION

B/W

ID DISP

HUE

HOLD

HLC

NAME

AUTO

SHARPNESS

DISP

8000K

CONTRAST

LANGUAGE

EXT

6000K

FACTORY

BRIGHT

INIT

4200K

MIRROR

3200K

FLIP

PUSH

Figure 3-1 Main Menu

A coaxial camera controller (purchase separately)

is required to select the menu and adjust the

camera parameters.

3.1 VIDEO.OUT

You can set the frame rate as 25 fps/30fps.

3.2 DAY/NIGHT

Color, B/W, AUTO and EXT are selectable for DAY/

NIGHT switches. Under the mode of the AUTO and

EXT, you can set the IR LED as Smart and CDS. If the

IR LED is selected as Smart, you can set the bright-

ness of the IR LED.

DAY/NIGHT

SPECIAL

1. PRIVACY

ZONE

1. MODE

AUTO

2. MOTION

2. D TO N

3. HLC

3. N TO D

4. RETURN

RET

4. DELAY TIME

5. RETURN

RET

Figure 3-4 SPECIAL

Figure 3-2 DAY/NIGHT

3.3.3 AWB

Auto, User, Push, 8000k, 6000k, 4200k and 3000k

are selectable for AWB. Under the mode of AUTO,

you need to set the R-G/B-G Gain and to select an

indoor/outdoor mode. If the AWB mode is select

as User, You need to set the R/G/B Gain manually.

3.3.4 AE

You can set the AE mode as HOLD, DC and ESC.

Brightness

: Brightness refers to the brightness

of the image.

Shutter

: Shutter denotes the speed of the shutter.

You can set the shutter as AUTO, 1/25, 1/30, 1/50,

1/60, 1/100, 1/120, 1/250, 1/500, 1/1k, 1/3k and

1/10k.

Flicker

: You can set the flicker status as 50HZ/60HZ

to prevent image flicking.

BLC

: BLC bases on the back area to enhance the

brightness of the whole image. You can set the

BLC gain from 0 to 16.

AGC

: AGC optimizes the clarity of image in poor

light scene. The value of AGC can be set from 1-5.

LSC

: LSC corrects the phenomenon where the

image gets darkened or blurred on the periphery.

AWB

1. MODE

AUTO

2. R-G GAIN

255

EXIT

3. B-G GAIN

151

4. RETURN

RET

Figure 3-3 AWB

3.3.5 SPECIAL

Privacy zone: Select a PRIVACY area. Set the

MASK PAT as OFF, GRAY, WHITE or BLACK. Set the

SX/EX/SY/EY value to define the position and size

of the area.

Motion: Set the Motion status as ON or OFF. Set

the SENSITIVITY from 0 to 255. Set the alarm status

as ICON/TRANCE/OFF. Set the hold time from

0 second to 255 seconds.

HLC: HLC supplements the brightness of the

peripheral area of the image. You can set the mask

value and threshold from 0 to 255.

3.3.6 EFFECT

Color Gain: Color gain adjust this feature to change

the saturation of the color. You can set the value

from 0 to 255.

Color Hue

: You can adjust the image HUE from

0 to 71.

Sharpness

: Sharpness determines the amount of

detail that an imaging system can reproduce.

You can set the value from 0 to 255.

Contrast

: Contrast enhances the difference in

color and light between parts of an image.

You can set the value from 0 to 255.

Bright Off.

: Bright Off. refers to the brightness

compensation of the image. You can set the bright

compensation value as 0 or 1.

Mirror

: You can set the Mirror status as ON/OFF.

Flip

: You can set the FLIP status as ON/OFF.

EFFECT

1. COLOR GAIN 200

2. COLOR HUE

200

1. CAMERA ID

3. SHARPNESS

2. ID DISP.

4. CONTRAST

150

3. NAME DISP.

5. BRIGHT OFF.

4. LANGUAGE

5. FACTORY INIT

6. MIRROR

6. RETURN

7. FLIP

8. RETURN

RET

Figure 3-6 SYSTEM

Figure 3-5 EFFECT

3.3.7 SYSTEM

You can set the camera ID from 0 to 255.

Select the ID display and name display status as

ON/OFF.

Chinese and English are selectable for the language

of the menu.

You can restore the camera to the default by

setting the factory initialization status as ON.

3.3.8 EXIT

Exit and Save & exit are selectable.

SYSTEM

255

ENG

OFF

RET