Game Winner HU2278401-GW Buku Petunjuk - Halaman 4
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pengisi Daya Baterai Game Winner HU2278401-GW. Game Winner HU2278401-GW 8 halaman. 6 v solar panel charger
Halaman CetakINSTALLATION PROCEDURES
1. Carefully remove solar panel assembly
and its hardware from the sealed blister
pack.
2. Once removed, locate the two bolts
(A).
3. Tilt the solar panel upward to properly
align with mounting holes located on the
mounting bracket.
4. Insert the two bolts (A) into each hole
on the mounting bracket and tighten
accordingly.
5. Once the panel is secured to the
bracket, mount on your Game Winner
Feeder by using bolts (D) via the Solar
Panel Ready feature or using self-tapping
screw (E) for your non Game Winner
Feeder or use bolt (B) and nut (C) instead
of self-tapping screw (E) .
6. Unscrew and remove one conduit
mounting bushings.
7. With a knife make a small incision to
the rubber bushing and then inset the
wire leads one at a time through the
rubber bushing hole on feeder hopper
(Game Winner Solar Panel Ready Feeders
only, other feeders may have to have the
wiring on the outside of the hopper).
HU2278401-GW-ENG
Pg.4
20180111-V.1