Maiwe MIGE2208G-8GT Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih Maiwe MIGE2208G-8GT. Maiwe MIGE2208G-8GT 5 halaman. Industrial ethernet switch

Maiwe MIGE2208G-8GT Panduan Pengguna
Warning
1.
Signals were transmitted by laser through optical fiber. The laser meets the
requirement of class I, no harm with normal operation. Do not look directly into the
fiber port and the end of the optical fiber terminator.
2.
Dust plugs need to be installed when optical connectors and optical modules are
not in use. Dust caps need to be installed when optical fibers are not in use.
3.
The bending radius of optical fiber should be greater than 20 times the diameter of
the optical fiber. In general, the bending radius should be equal to or greater than
40mm.
Power input
Before connecting the power cord, make sure that the ground is connected. Do
connect the power cord to the power terminal of the device according to the definition.
Notes
1.
When using a switch, the voltage can only be input from V1+ and V1-, V1+ connects
to live wire L, and V1- to neutral wire N. Do not connect from V2+, V2-; pay attention
to safety and prevent electric shock.
2.
Power-on operation: First connect the power cord to the power terminal of the
device according to the definition shown in the figure above, and then power on.
3.
Power-off operation: first unplug the power plug, and then remove the power cord.

Specifications

MIGE2206G-2GF-4GT
Switch performance
Bandwidth
12G
Cache size
1.0Mbit
MAC table size
Interface
2x1000Base-X
Gigabit SFP port
Gigabit RJ45 port
10/100/1000MBase-TX
RJ45 ports
Full duplex/half duplex self-adaptation, support MDI/MDI-X self-
Power
Power consumption
8W@24V(Max)
DC input
DC12~48V
AC input
AC85~264V (frequency: 47~63Hz) or DC110~370V
Mechanical
Size
144×33mm×97mm(H×W×D)(Excluding DIN rail)
Installation method
Heat dissipation
Aluminum alloy single-rib chassis surface heat dissipation, fanless
form
IP protection
Weight
Working environment
Operating temp.
Storage temp.
Humidity
MIGE2208G-8GT
18G
1.5Mbit
8K
4K
SFP slot
4*
8*
10/100/1000MBase-TX
RJ45 ports
adaptation
6W@24V(Max)
DC12~48V/DC48V optional,
support dual power supply, and
reverse connection protection.
35mm standard DIN rail installation
IP40
About 0.44kg
-40~+85℃
-40~+85℃
5~95% (No condensation)
/