Adexa KLG 231-HG Panduan Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk panggangan Adexa KLG 231-HG. Adexa KLG 231-HG 14 halaman. Electrical doner kebab grill -top motor series moving body&thermal glass

Adexa KLG 231-HG Panduan Pengoperasian

Preliminary Information

➢ Keep Operation Manual and give it to the next owner of the equipment after you.
➢ Control the equipment before installation for any visible damages. Do not install
or use any damaged equipment.

Packaging

➢ Packaging protects the equipment against possible damages during transportation.
This packaging has been made of recycled material. That the packaging material
is made of recycled material both ensures saving on raw material and reduces
quantity of waste. If you want to dispose the packaging material yourself, please
call the nearest recycling center.

Movement, Transportation and Storage

➢ If you need to transport the equipment, then move it in its original container and
comply with the movement marks on the container.
➢ If the original container of the equipment is not available, fix the moving parts
(Sword (or skewer), fixing handle, kebab meal tray and motor body) by using
tape against their playing their places during transportation.
➢ Take measure against any possible strokes to Heater Mechanism On/Off
Keys, Motor Body, Cable Outlet Sleeve, Thermal Glass, and other surfaces.
Do not put any load on the equipment heavier than the latter.
➢ Keep the product in normal position during movement.
➢ If the equipment shall not be used or kept for sale for extended
time, store it indoor in dry, dust- and damp-free conditions.

First Cleaning and First Heating

➢ Before first operation, remove nylon on your equipment and wipe inner and outer
parts with a damp cloth and then wipe dry.
➢ Do not use detergent for wiping operation.
➢ A temporary odour and smoke may occur at the heated parts of your equipment
during first heating.
➢ Odour and any possible smoke shall disappear soon. Odour and smoke do not
indicate incorrect connection or defective equipment.

Things to be done Before First Operation

7