Majacraft M WH ROSE Buku Petunjuk - Halaman 6

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Roda Berputar Majacraft M WH ROSE. Majacraft M WH ROSE 12 halaman.

5. Drive Wheel

Required:

Drive Wheel assembly

1 - Star Washer (in the hardware bag)

1 - Wooden Nut (wrapped separately)

Make sure the wooden nut has been removed from

the drive axle. Check that the star washer is on the

drive axle - if not, then slide the star washer on. The

black bushes must be in place on the front and back

of the Stem/Handle assembly.

Fit the drive wheel to the base assembly. Slide the drive shaft through the black bushes in the Stem/

Handle assembly from the back to the front. Screw the wooden nut on to the drive axle and tighten it

firmly.

6. Spinning Head

Required:

1 M6 60mm Gold JCB (2 1/2") bolt (in the handle

assembly)

4mm allen T wrench (in the hardware bag)

1 Wood spacer tube (in the handle assembly)

Spinning Head

Take the spinning head and slide it down into the handle. Push the JCB bolt in a little way through

the hole in the top of the handle. Align the wooden spacer tube in the handle so the bolt will can be

pushed through the centre.

majacraft