Majacraft Pioneer Petunjuk Perakitan - Halaman 4

Jelajahi secara online atau unduh pdf Petunjuk Perakitan untuk Roda Berputar Majacraft Pioneer. Majacraft Pioneer 11 halaman.

You will require the three 40mm JCB bolts. The 4mm allen key is necessary. Position the base

assembly on it's edge and then push the JCB bolts through from underneath. Take care that the

pedals do not swing free and become damaged.

Align the JCB bolts with the threaded holes in the

stem and the brace. Use the 4mm allen key to screw

the JCB bolts into place.

3. Attach drive wheel to stem

Required:

5mm allen key (in the hardware bag)

Base/Stem assembly

Drive Wheel

Do not tighten the bolts fully yet. Repeat this with the remaining

two JCB bolts. When they all in place then tighten bolts securing

the stem onto the base assembly.

majacraft