Majella MCVC Panduan DIY - Halaman 7

Jelajahi secara online atau unduh pdf Panduan DIY untuk Konverter Media Majella MCVC. Majella MCVC 15 halaman. Midi to cv converter
Juga untuk Majella MCVC: Panduan Pengguna (6 halaman)

Halaman Cetak

MCVC

DIY Manual

Minijacks (17x)

Take care on this one!

We advice to (without soldering) place the

jacks into the PCB (yellow marked, figure 4).

Then place the panel on the jacks. Carefully

turn around the MCVC and lay it down on

supports, as shown below in figure 5:

Figure 5:

support

Solder one pin from each connector. Make

sure to press the panel so that each

minijack connector is tight pressed to the

PCB when soldering the pin. Check if all

minijacks fit tight between the panel and

Figure 4:

3.5 mm minijacks (YELLOW)

PCB. Then solder the rest of the pins.