deBont Detti 125 Panduan Pemilik - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat deBont Detti 125. deBont Detti 125 6 halaman. Tube power amplifier

█ Main fuse

This fuse cuts power to the entire amplifier in case of a serious fault.

█ HT (B+) fuse

For safety reasons, the high voltage used in the Detti has its own dedicated fuse.

█ Replacing a fuse

Turn off the amp, unplug the power cord and let the remaining energy drain for at least 20

minutes before checking and/or replacing any of the fuses. Always replace with a fuse of the

same rating as stated on the back of the amplifier below the fuse holder.

Note: Fuses usually blow for a good reason. Please consult a qualified technician when

replacement is necessary.

█ Fan

The Detti requires active cooling for both the electronics and to maximize the lifespan of the

power tubes. Air is sucked in through the back and blown out through the front grill. Blocking

the fan or stopping fan rotation altogether will result in the amp shutting itself off to protect

itself against thermal damage. The front panel status LED will first blink blue/off. If fan

operation is not restored within 2 minutes, the front panel status LED will blink blue/red and

the power is cut.

deBont Amps Detti 125 Tube Power Amp Owner's manual