GameSir G5 Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Komputer GameSir G5. GameSir G5 2 halaman. Bluetooth controller
Juga untuk GameSir G5: Panduan Pengguna (12 halaman), Panduan Pengguna (8 halaman), Panduan Pengguna (9 halaman)

Halaman Cetak

4.Function

Turn on / off

a. Turn on: Long press "HOME" button for 2 seconds to turn on the gamepad.

b. Turn off: Long press "HOME" button for 2 seconds to turn off the gamepad.

Low battery indicator

a. When usable power is lower than 10%, HOME button turns red and flashes

slowly. Please charge the gamepad timely.

b. When usable power is lower than 5%, the gamepad will turn off

automatically.

* HOME button flashes slowly in green when charging. HOME button keeps in

solid green when fully charged.

Check the power

Quickly click POWER button to see indicator lights showing remain power. They

recover to original status after showing power for 3 seconds continuously.

Indicator lights instruction:

1)Fully charged: 75%~100%;

2)Reverse 3 lights: 50%~75%;

3)Reverse 2 lights: 25%~50%;

4)Reverse 1 light: 1%~25%;

Automatic turning off

a. When the gamepad is on, it will turn off automatically when there is no

connection for 2 minutes;

b. When the gamepad is connected, it will turn off automatically when there is

no control for 5 minutes;

TURBO function

The function is commonly adopted in shooting games. You finger gets fatigue

while pressing the shooting button unceasingly, but TURBO function can realize

continuous and strengthened shooting by holding still the TURBO button,

meanwhile relieve your finger from fatigue.

Set up: Press still TURBO button, then press still the buttons you need to set up

TURBO function;

Undo: Double click TURBO button, then clear all the set-up TURBO buttons;

Adjust TURBO frequency: Press still TURBO, then press UP or DOWN of D-pad.

Press UP to quicken, each press quickens 10ms. Press DOWN to slow, each

press slows 10ms.

- 4 -

5.Connect The Gamepad

1) Make sure Bluetooth in your device is on

2) When the gamepad is off, long press HOME button for 2 seconds. It will flash

quickly and enter pair mode:

a. Android phones: Enter GameSir World app > GameSir Spirit > Searching

gamepad, and connect the gamepad with your phone.

Scan the QR Code or browse the link below to download GameSir World app.

https://gamesir.hk/gsw

b. iOS phones: Enter Happy Chick Emulator > (gamepad icon) > Searching

GameSir, and connect the gamepad with your phone.Caution: GameSir G5

only works on the games downloaded through Happy Chick Emulator on iOS

devices.

Scan the QR Code or browse the link below to download Happy Chick.

https://gamesir.hk/happychick

When light indicators show (

solid, the gamepad is successfully connected. Enjoy your games!

For the complete setup tutorial, please visit https://gamesir.hk/pages/g5-tutorial

- 5 -

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of

the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

) and HOME button keeps

- 6 -