Centre Point 400112 Buku Petunjuk - Halaman 6

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Tingkat Laser Centre Point 400112. Centre Point 400112 11 halaman. Crossline laser level

Care & Maintenance

1. This is a precision measuring tool and should

always be handled with care and transported

within the carry pouch provided.

2. Always turn the tool off when transporting the

laser level or moving around the job site.

3. Whenever possible, store the tool in a dry,

shady location.

4. When the tool is not in use or is being stored,

it is highly recommended to remove the

batteries.

Trouble Shooting

ERROR

Laser does not turn on

Laser does not remain on

for long periods of use

Laser does not level off

CAUSE & SOLUTION

Check the batteries. They may be in the wrong way or need replacing.

•

Check the battery compartment for signs of damage and ensure that

•

the compartment is clean and that the battery terminals are not bent.

Check the batteries. They may need replacing.

•

Check the battery compartment for signs of damage and ensure that

•

the compartment is clean and that the battery terminals are not bent.

The tool may be outside its self levelling range and may require an

•

adjustment before self-levelling can commence.

The tool may have impact damage.

•

5. Calibration of the tool is recommended: every

six months, if ongoing accurate levelling is

required, or an impact has occurred.

6. The operator should check the accuracy of the

tool before precision levelling is attempted.

Failure to do so may result in inaccurate

measurements.

7. Clean the tool with a dry, soft cloth after use in

dusty, damp or wet conditions before storing.

8. Smudges and fingerprints may be removed

with a damp tissue or a soft, lint-free cloth.