BriskHeat ACR 3 MiniPRO Hot Bonder Buku Petunjuk - Halaman 12

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Unit Kontrol BriskHeat ACR 3 MiniPRO Hot Bonder. BriskHeat ACR 3 MiniPRO Hot Bonder 14 halaman.

Halaman Cetak
This function saves a single program file to a USB flash disk (thumb drive).
Use the USB flash disk to transfer programs to another hot bonder or
archive programs.
1.
Access the SYSTEM menu.
2.
Touch SAVE PROGRAMS TO USB DRIVE button.
3.
Select the desired program file from the drop down menu.
4.
Touch SAVE SELECTED PROGRAM TO USB DRIVE button.
5.
Insert USB flash drive (thumb drive) in USB port located on the operator
console. Touch OK button.
6.
Follow remaining on-screen commands.

Save All Program Files to USB Drive:

This function saves all stored program files to a USB flash disk (thumb drive).
Use the USB flash disk to transfer programs to another hot bonder or archive
programs.
1.
Access the SYSTEM menu.
2.
Touch SAVE PROGRAM TO USB DRIVE button.
3.
Touch SAVE ALL PROGRAMS TO USB DRIVE button.
4.
Insert USB flash drive (thumb drive) in USB port located on the operator
console. Touch OK button.
5.
Follow remaining on-screen commands.
Load a Single Program File from USB Drive:
This function loads a single program from a USB flash disk (thumb drive) to
your hot bonder.
®
NOTE: The ACR
MiniPRO™ Hot Bonder is capable of storing up to 30
programs in its internal memory.
1.
Access the SYSTEM menu.
2.
Touch LOAD PROGRAMS FROM USB DRIVE button.
3.
Insert USB flash drive (thumb drive) in USB port located on the operator
console. Touch OK button.
4.
Select the desired program file from the drop down menu.
5.
Touch LOAD SELECTED PROGRAM FROM USB DRIVE button.
6.
Follow remaining on-screen commands.

Load All Program Files from USB Drive:

This function loads all stored programs from a USB flash disk (thumb drive) to
®
© BriskHeat
Corporation. All rights reserved.
®
ACR
3 MiniPRO™ Hot Bonder
23
your hot bonder.
®
NOTE: The ACR
MiniPRO™ Hot Bonder is capable of storing up to 30
programs in its internal memory.
1.
Access the SYSTEM menu.
2.
Touch LOAD PROGRAMS FROM USB DRIVE button.
3.
Touch LOAD ALL PROGRAM FROM USB DRIVE button.
4.
Insert USB flash drive (thumb drive) in USB port located on the operator
console. Touch OK button.
5.
Follow remaining on-screen commands.

Shut Down System:

This function safely shuts down the hot bonder. This function is recommended
to provide optimal performance.
1.
Access the SYSTEM menu.
2.
Touch
button.
3.
Press OK to shut down hot bonder.
4.
Flip the red main power switch to the OFF position. The main power switch
is not illuminated when off.

Change System Date and Time:

1.
Access the SYSTEM menu.
2.
In the DATE / TIME SETUP section of the SYSTEM menu, touch the desired
field. Enter the new date / time.
3.
Touch LOAD NEW DATE / TIME button.
®
© BriskHeat
Corporation. All rights reserved.
®
ACR
3 MiniPRO™ Hot Bonder
24