Bristan Descent DSC FSBSM C Petunjuk Instalasi dan Panduan Pengguna - Halaman 10
Jelajahi secara online atau unduh pdf Petunjuk Instalasi dan Panduan Pengguna untuk Produk Pipa Bristan Descent DSC FSBSM C. Bristan Descent DSC FSBSM C 16 halaman. Tap
Juga untuk Bristan Descent DSC FSBSM C: Panduan Petunjuk Instalasi (16 halaman)
Halaman Cetak
Installation
Bath Filler and Bath Shower Mixer
1. Fit the tap body to the bath ensuring
that the washers are fitted between the
body and the bath to create a water
tight seal.
2. Secure the body to the bath using the
washers and metal backnut. Tighten the
backnuts onto the threaded tails.
A suitable spanner may be required to
fully tighten the backnuts.
3. Connect the hot and cold water
supplies to the threaded tails using
a ¾" BSP connector (not supplied).
4. Bath Shower Mixer only - fit the
shower hose to the hose outlet using
the small sealing washer, and the
handset to the hose using the small
washer.
Important
: Prior to the drilling into
walls, check there no hidden electrical
wires, cables or water supply pipes with
the aid of an electronic detector.
If you use power tools do not forget to:
• Wear eye protection
• Unplug equipment after use
Fit the wall bracket (not shown) to the
wall using the fixings supplied, ensuring
the handset and hose reaches it.
5. Turn on both water supplies and turn
both handles to the on position, letting
the water flow for a few minutes.
6. Check all joins and connections for
any leaks.
7. To switch from bath to shower mode,
pull the diverter knob up and turn, to
revert back to bath filling mode push
the diverter knob back down.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
10