Bristan FIXED HEADS FHC ABRD01 C Petunjuk Pemasangan - Halaman 2
Jelajahi secara online atau unduh pdf Petunjuk Pemasangan untuk Produk Pipa Bristan FIXED HEADS FHC ABRD01 C. Bristan FIXED HEADS FHC ABRD01 C 2 halaman. 200mm round/square fixed shower head
Halaman Cetak
This shower rose is intended to be used in conjunction with other products, such
as a shower arm and valve.
INSTALLATION
This shower head should be arranged in your system with a supply of pre-mixed
water from a shower valve.
This product is designed to be fitted to shower arms with a male ½"BSP thread. If
replacing a shower head, simply unscrew from the shower arm and replace. The
shower head comes with a swivel joint, so the head can be positioned as desired.
Tighten by hand ONLY. Check joint and connections for any leaks, if this occurs
check the condition of the washer. Replace if necessary or reseat correctly then
re-tighten.
In order to maintain optimum spray, we advise that the shower rose face plate
be regularly cleaned, particularly in hard water areas.
CONTENTS:
1. Swivel
(x1)
2. Rubber Washer
(x1)
3. Shower Rose
(x1)
1
2
3
INSTALLATION DIAGRAM
AFTERCARE INSTRUCTIONS
Your fitting has a high quality finish and should be treated with care to preserve the
visible surfaces.
All surface finishes will wear if not cleaned correctly, the only safe way to clean your
mixer is to wipe with a soft damp cloth. Stains can be removed using washing up
liquid. All bath cleaning powders and liquids will damage the surface of your fitting,
even the non-scratch cleaners.
NOTE: Never use abrasive detergents or disinfectants or those containing
alcohol, hydrochloric acid or phosphoric acid.
Shower Arm
(Not Supplied)
Fixed Head