Decagon Devices GS3 Manual - Halaman 9

Jelajahi secara online atau unduh pdf Manual untuk Aksesori Decagon Devices GS3. Decagon Devices GS3 12 halaman. Greenhouse sensor

GS3 Integrator Guide

ADDRESS QUERY COMMAND (?!)

While disconnected from a bus, the address query command can be used to determine which sensor you

are currently communicating with. Sending this command over a bus will cause a bus contention where all

the sensors will respond simultaneously and corrupt the data line. This command is helpful if you are trying

to isolate a failed sensor. Here is an example output from one of our sensors (the logger command is in

bold):

?!0

PARAMETER

FIXED LENGTH

2 Chars

1 Char

DESCRIPTION

Request from the data logger asking for a response from any sensor

listening on the data line.

Sensor Address. Returns the sensor address to the currently

connected sensor.

For support contact us via email at

or call us at 1.509.332.5600 between 7AM to 5PM PST

R34