Bristan IRBS1-CP Petunjuk Instalasi dan Panduan Pengguna - Halaman 10
Jelajahi secara online atau unduh pdf Petunjuk Instalasi dan Panduan Pengguna untuk Produk Pipa Bristan IRBS1-CP. Bristan IRBS1-CP 20 halaman. Infrared automatic basin spouts
Halaman Cetak
Installation
IRBS2-CP
1. Fit The Spout
Screw the fixing rods into the bottom of
the spout.
Fit the spout to the sink / work surface
ensuring the sensor cable is threaded
through the hole in the sink / work
surface.
reflective surfaces to prevent the tap
from automatically switching on and off.
2. Secure Spout to Sink / Work Surface
Thread the rubber washer and metal
washer onto the fixing rods up to the
underside of the sink / work surface.
Secure the spout in place by screwing
the fixing nuts onto the fixing rods.
Tighten the fixing nuts using a suitable
spanner.
3. Connect Sensor Cable
Go to the 'Electrical Connections'
section.
4. Connect Water Supplies
Screw the flexi hose into the bottom of
the spout, ensuring it is tightened fully
by hand only.
Connect the flexi hose to the
power supply box. Go to the 'Water
Connections' section.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
10
Important: It is advised
to ensure that the
product is at least
360mm away from
Sensor
Flexi
Cable
Tail
Sensor
Cable
Flexi Hose