Bristan IRBS4-BN Petunjuk Instalasi dan Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Petunjuk Instalasi dan Panduan Pengguna untuk Produk Pipa Bristan IRBS4-BN. Bristan IRBS4-BN 20 halaman. Infrared temperature control automatic basin spout
Juga untuk Bristan IRBS4-BN: Petunjuk Instalasi dan Panduan Pengguna (16 halaman)
Halaman Cetak
Important Safety Information
• Please read these instructions thoroughly and retain for future use.
• All products manufactured and supplied by Bristan are safe provided they are installed,
used correctly and receive regular maintenance in accordance with these instructions.
• If you are in any doubt about your ability to install this product safely you must
employ the services of an experienced qualified plumber.
• These fittings need to be installed in accordance with, and meet the requirements of
the Water Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.
•
Warning: Do not operate the product if you suspect it is frozen. Do not site it
where it might be subjected to freezing conditions.
• Remove all packaging and check the contents for damage before starting installation.
• Before starting any installation please consider the following: before drilling into walls,
check that there are no hidden electrical wires, cables or water supply pipes. This can
be checked with the aid of an electronic detector.
• If power tools are used do not forget to:
• Fitting isolating valves to the inlet feeds is required for ease of maintenance.
•
Warning: Before installing the new spout it is essential that you thoroughly flush
through the pipework in order to remove any remaining swarf, solder, etc.
Failure to carry out this procedure could cause problems or damage to the workings of
the spout.
• This product must not be modified in any way as this will invalidate the guarantee.
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
- Wear eye protection
- Unplug equipment after use
3