Bristan IRBS4-CP Petunjuk Instalasi dan Panduan Pengguna - Halaman 13
Jelajahi secara online atau unduh pdf Petunjuk Instalasi dan Panduan Pengguna untuk Produk Pipa Bristan IRBS4-CP. Bristan IRBS4-CP 16 halaman. Infrared temperature control automatic basin spout
Juga untuk Bristan IRBS4-CP: Petunjuk Instalasi dan Panduan Pengguna (20 halaman)
Troubleshooting
Symptom
Flow of water
Inlet water supply pressure too
too high.
high.
Spout runs
Object in the sensing range.
randomly
Reflective surfaces, i.e. High
without a user
Visibility jacket/clothing activate
present.
the sensor.
Sensor light faulty.
Sensor light
Circuit board faulty or has been
not working.
allowed to get wet.
Batteries are exhausted.
Short cycles
Incorrect batteries fitted.
of batteries.
Infrared
sensor
Batteries running low.
flickering.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
Cause
Remedy
Adjust inlet water pressure
accordingly. Refer to the
'Specification' section.
Ensure the sensing range is clear.
Ensure that the product is at least
360mm from reflective surfaces.
Contact Bristan Customer
Services.
Replace batteries.
Replace batteries. Ensure
batteries are 1.5V AA (LR6)
Alkaline batteries (preferably
=>2000mAh) for good battery
life.
Replace batteries. Ensure
batteries are 1.5V AA (LR6)
Alkaline batteries (preferably
=>2000mAh) for good battery
life.
13