Bristan Java J BF C Petunjuk Pemasangan - Halaman 2
Jelajahi secara online atau unduh pdf Petunjuk Pemasangan untuk Produk Pipa Bristan Java J BF C. Bristan Java J BF C 2 halaman. Deck mounted bath filler
Halaman Cetak
WATER PRESSURE
This mixer is suitable for use at all supply pressures. However for
optimum use both the hot and cold supplies should be reasonably
balanced. If the fitting is installed at low pressure (tank fed), then
the minimum height from the outlet of the nozzle to the underside of
the cold tank should be 1.8 metres to ensure adequate
performance.
This mixer should be installed in compliance with Water
Regulations. For further details contact your Local Water Authority.
INSTALLATION
1. Identify all components and check for completeness, particularly
before arranging fitting.
2. Fit the mixer to the bath using the gasket and backnuts.
3. Connect the hot and cold water supplies.
4. Fully open both valves, letting them run for a few minutes to
flush the system.
5. Check all joints and connections for leaks.
6. See over the page for aftercare instructions.
MAINTENANCE
If the fitting begins to drip:
1. Turn off the water supply.
2. Prise off cap, loosen grub screw with 2.5mm hexagon key and
pull off head.
3. Remove valve.
4. Carefully clean seating, rubber washer and ceramic disc.
5. Replace valve and head and turn on the water supply.
6. Contact our helpline if problem persists.
CD VALVE
Please note: In the unlikely event you find a part missing please
contact our Customer Service Helpline on 0844 701 6273 or email
[email protected] for immediate dispatch of part.
CLEAN WASHER
AND SEAT