Bristan K 1/2 C Petunjuk Pemasangan & Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Pemasangan & Panduan Pengguna untuk Produk Pipa Bristan K 1/2 C. Bristan K 1/2 C 5 halaman.
Juga untuk Bristan K 1/2 C: Petunjuk Pemasangan & Panduan Pengguna (20 halaman)

Halaman Cetak
IMPORTANT
Images shown are for illustrative
purposes only.
The tap you have purchased may look
different to those pictured in these
instructions, but will follow the same
installation steps.
Your contents page will be specific to
your product.
If you find your product or any of it's
components differ from those shown on
the contents page, please contact our
Customer Support on - 0330 026 6273
1*
3
Connect the hot and cold water
supplies to the threaded tails.
You may be required to
secure the plinth to the
tap with a grub screw.
If the hole is not
directly visible on the
plinth, check underneath
rubber seal
Ensure rubber seal is in
place once plinth is
attached
REMEMBER
isolation valves
for maintenance
purposes

Installation

1
2
Secure the taps to the basin/bath by
using the washer and metal backnut
below the basin/bath.
4
Hot
To fit
Feed the tap body
through the
bath/basin and
ensure plinth and
plinth seals are in
place.
Your taps may
come with plinths
and will either be
included
pre-attached or
loose in the box
REMEMBER
Hot on the
left, cold on
the right!
IMPORTANT
Turn on water
supply for a few
minutes and check
all joints and
connections for
Cold
any leaks.