Bristan Pivot Series Panduan Petunjuk Instalasi - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Produk Pipa Bristan Pivot Series. Bristan Pivot Series 16 halaman. Tap

Maintenance

General Cleaning

Your product has a high quality finish

and should be treated with care to

preserve the visible surfaces. All

surfaces will wear if not cleaned

correctly, the only safe way to clean your

mixer is to wipe with a soft damp cloth.

Stains can be removed using washing

up liquid. All bath cleaning powders and

liquids will damage the surface of your

fitting, even the non-scratch cleaners.

Note: Never use abrasive detergents

or disinfectants or those containing

alcohol, hydrochloric acid or phosphoric

Grub Screw

Cap

acid.

Handle

Cleaning the Cartridge

Valve Shroud

Before carrying out any maintenance,

turn off the both water supplies or close

Plinth

any isolating valves.

Remove the cap and loosen the grub

screw using a 2.5mm hexagonal key.

Remove the handle. Unscrew the valve

shroud and the plinth. Remove the valve.

Valve

Wash the valve with clean running water

and make sure that any debris has been

removed.

If necessary replace the valve using

parts supplied by Bristan only.

Lightly grease the seal (only use silicone

grease), replace the valve, plinth, valve

shroud and the handle.

Tighten the grub screw and push fit the

cap.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.