Majestic Napoli Panduan Instalasi - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Perlengkapan Kamar Mandi Majestic Napoli. Majestic Napoli 15 halaman. Surface profiles

Napoli Installation Guide - Surface Profiles

12.5mm

One Glass to Glass vertical sea is to be pushed on to the edge of the In Line panel on the

handle side of the Door, touching the underframe and trimmed level with the glass at the top.

The second vertical seal is to be cut in 3 sections to fit to the edge of the In Line panel above,

below and between the hinges.

For maximum resistance to leakage, the seal sections should be cut as shown above to allow

them to fill the gaps in the hinge through which water might otherwise escape.

The Majestic Shower Company Limited

17 Flitch Industrial Estate, Chelmsford Road, Dunmow, CM6 1XJ

Slit here

PANEL SIDE

Notch

Open the door and slide the 3 sections of seal on to the edge of the glass panel,

pushing the notched ends inside the hinge as shown.

The lower section of the seal should be cut straight and pushed down to touch

the Underframe (see illustration at Step 19).

Telephone +44 (0) 8448 001 500

Facsimile +44 (0) 1279 635 074 [email protected] www.majesticshowers.com

DOOR SIDE

Slit

VIEW FROM

INSIDE OF

(OUTWARD

OPENING

DOOR)

GLASS NOT

SHOWN

Slit